JetMax Junior Pool Cleaner
For pools up to 50 feet in length, the JetMax Junior cleans up to 6,000 square feet per hour and filters up to 4,500 GPH. This is a Hydro-Robotic floor cleaner only with slope of 45 degrees or less. It includes the MGA kit which converts the cleaner to a manual vacuum system.
The JetMax Junior vacuums, hydro-scrubs and moves around the pool using just the power of the onboard pump and an ingenious system of hydraulic valves and nozzles. And because there are no moving mechanical parts or brushes to be replaced, JetMax is the most economical solution for any commercial application.
The Hydro-Robotic Propulsion System uses the power of the water exhaust generated by the pump to move the cleaner. The water stream is directed by a 2-way valve in order to alternate direction of the unit. In addition, a separate impeller diverts two separate water jets through nozzles located at the bottom of the cleaner. The role of these additional jets is to hydro-scrub the pool surface, lifting the sediments and push them into the suction stream of the pump.
Standard Rubber Brushes (Concrete). Will work most of the time on most surfaces with no problems.
PVA Brushes: For slippery surfaces like tile, fiberglass, stainless steel or vinyl.
- Cable Length: 75 Feet
- Cleaning Pattern: Mechanical Turning Presets
- Power Washing Jets: Yes
- Climbing: No
- Remote Control: No
- Pump Voltage: 30 Volts
- Pump Type: High Efficiency, Brushless
- Pump Capacity: 4500 gallons per hour
- Filtration Type: Self-contained
- Filter Size: Standard
- Filter Type: Bottom Access Bag
- Filter Porosity: 2 microns
- Obstacle Avoidance: Rollers
- Power Supply: Heavy-Duty
- Cleaning Programs: 2 hours, C-Run
- Timer: Yes
- Voltage Input: 120 Volts, 60 Hz
- Voltage Output: 36 Volts
- Wattage: 230 Watts