Enlarge and zoom this image

Description of Chemtrol 265 PPM/pH Digital Controller with 4-20 mA Outputs

The CHEMTROL® 265 PPM/pH Digital Controller features a new Chlorine Sensor that gives easy-to-use, direct and reliable readings of Free Chlorine concentration water. Unlike other chlorine sensors on the market, this sensor is easy to install and highly reliable. It does not require expensive reagents and is compatible with cyanuric acid (CYA) at all concentrations. It is so reliable that it carries a two-year warranty.

STANDARD FEATURES
Easy to Install
Simple to Use
All Control Functions on Front Panel
Separate Adjustable Setpoints
Separate Adjustable Alarms
Acid/Base Selector
Proportional Feed with Adjustable Bandwith
Separate Adjustable Overfeed Safety Timers
Rain and Splash Proof Cabinet
5-year Electronics Warranty
Toll-Free Technical Support

SIMPLE TO OPERATE
The CHEMTROL 265 Free Chlorine Analyzer automatically maintains both Free Chlorine concentration and pH of the water. All operating functions are clearly labeled and accessible from the front panel, with safety and easy-reset features not found on other controllers. The Free Chlorine concentration can be adjusted from 0.0 to 10 ppm (or mg/l) based on local Health Department regulations for prevention of germs and bacteria (or from 0.01 to 3.00 for low chlorine level applications). The pH control level can be adjusted from 6.0 to 8.0. The standard pH control level is 7.5. Below 7.4, the water is too acidic and causes corrosion. Above 7.6, it is too alkaline and causes scaling, stains and reduced sanitizer efficiency.

EXTENDED TECHNICAL SUPPORT

Technical support from CHEMTROL is based on our experience with over 30,000 installations worldwide. It is available by toll-free phone, by fax or by e-mail.

CH265