EnergySaver Pool Covers begin with the finest quality materials from top domestic suppliers. These insulated pool cover systems are precision crafted in the U.S. Each cover is tailored to your specifications. The number one choice of architects and designers, these pool covers pay for themselves in just a few years!
Conserve Heat and Use Less Energy
Reduce Evaporative Water Loss
Reduce Chemical Loss
ENERGYSAVER STANDARD (3-YEAR WARRANTY)
With more than one-million square feet manufactured and sold every year, the EnergySaver Standard Cover's proven track record of ease of use, durability, and reliability make it the number one choice in commercial pool covers. The EnergySaver Standard Cover covers pay for themselves in less than two years!
This workhorse pool cover boasts features such as stainless steel grommets, load-dispersing plates to reinforce ends, UV-resistant polyester thread, weighted anchor edges sewn along the length of the cover, and reinforced rail and ladder cutouts, making it the most effective cover system available for complex, irregular shaped and multi-functional pools with various water features. Please Note: Cover is not classified as safety cover system and should not be used as such and carries no warranty for such use.
The EnergySaver Standard Pool Cover material is Blue-Black 12 x 10 count fabric-foam laminate with black edging. Material consist of white foam, 1/8-inch thick, closed-cell, cross-linked, 2 lb. PSF density polyethylene and enhanced with EVA additive and fortified on both sides with High-Density Polyethylene (HDPE) fabric consisting of clear, UV resistant, woven tapes, protected on both sides with 2 mil Low Density Polyethylene (LDPE), UV stabilized UV inhibitor and chemically resistant coating. Overall thickness is 8 mils. Laminated materials are sewn together by using double needle, lockstitch machine with size 138 bonded, yarn-dyed black, UV resistant, polyester thread. Encapsulated with four (4) layers of 12 x 10 woven PE fabrics, weighted vinyl straps material is sewn along the length of the cover and perforated at every 18 inch intervals to allow water to go into the edge cavity for extra weight and wind resistance. Each end of the cover is reinforced with four (4) layers of 12 x 10 woven PE fabrics. Corners are strengthened by folding (doubling) the fabric material. Each pull-point location is reinforced with six (6) layers of 12 x 10 woven PE fabric, three (3) equally spaced, non-corrosive stainless steel grommets, and 1/8 inch thick T-1 PVC load-dispersing plate. Solid 3/4 inch diameter white Ultra High Molecular Weight Polyethylene (UHMW-PE) dowel coupled with 1/4 inch solid braided white polyester cord is securely tied to the pull-point for easy cover retrieval.
Double layer 12 x 10 fabric-foam encapsulation. UV resistant. Overall thickness 8 mils. Overall weight: 4.95 ounce/square yard. Weighted, extruded UVR vinyl. Weighted, anchored edge. Highly visible ASTM approved safety/warning labels are securely attached to each completed pool cover.
Due to contractual marketing territories, this pool cover cannot be shipped to California, Oregon, Nevada, Florida or Arizona.
To obtain an estimate on the EnergySaver Pool Blanket, please fax us your dimensions (including a drawing showing steps and/or cut-outs) to 1-207-692-1033. (Priced per square foot.) Ladder and rail cut-outs, hinges and rounded corners are incorporated into the cover(s). Precautions are taken by rounding and reinforcing cut-out corners to prevent stress tears.
Need a storage reel to go with your cover? Click here for Storage Reels!