Daktronics T-7060 Touchpad 22 x 60 Inches 0A-1040-0108 0A-1040-0108 Daktronics patented T-7000 series touchpads meet all FINA requirements. The touchpads are sensitive across the entire nonslip, nonabrasive surface. Daktronics touchpads' flow-through design eliminate floating and allow the touchpad to hang firmly in place against the pool wall. The stainless steel touchpads are a vital component of a complete timing/scoring system.All touchpad models have a thickness of 0.3 inches (8 mm). Width: 5 feet (1524 mm). Height: 1 foot 10 inches (559 mm). Top Flange Depth: 2.8 inches (71 mm).OPERATING. The touchpads are designed to be self-draining. As the unit is lifted from the pool, water quickly flows out through small drainage holes. The ability to let water flow through the touchpad virtually eliminates the possibility of the touchpad floating away from the pool wall and requires no pumping or air-metering. Remove the touchpads from pool between use, rinse with clean water, and allow to dry. Maximum span touchpad should remain in the water is 48 hours. The touchpads are unaffected by temperature or altitude changes and are suitable for indoor or outdoor pools.MOUNTING: An adjustable stainless steel mounting bracket is provided to fit most common pool types. Custom mounting brackets are also available for unique gutter configurations. PLUG: The touchpad has a standard cable length of 9 feet 6 inches (2896 mm) with a banana plug that is field replaceable.