This replacement CAT ORP probe fits all Hayward and CAT controllers. It includes a 30 inch cable to connect the probe with your control system.
This CAT/Hayward compatible replacement probe is made specifically for Hayward CAT Controllers and follow the original manufacturer's specifications. These high quality electrodes provide excellent performance at a superior value.
Your sensors should be cleaned regularly, depending on bather load and characteristics specific to your facility. It's a relatively easy process. First, turn off your controller and all feeders. Close flow cell valves. Remove the sensors from the flow cell by unscrewing by hand and disconnect connectors. Carefully place your sensors into a clean container with water to ensure the tip remains wet.
Next, using a soft toothbrush, gently scrub the white ring and the tips of the sensor (at bottom) with regular toothpaste. Any oil or calcium buildup should be scrubbed with a mild degreasing detergent. Once cleaned, you can rinse the probes with the clean water in your container. Replace Teflon tape (with new tape) and reinstall the sensors by hand tightening only After reconnecting to be controller, you will need to manually test and balance your water.
|Lead Time:||34 days (if out of stock)|
|AKA:||AQPR-25-24, PRO25-2, HCX025|
|Manufacturer:||CAT by Poolweb.com|
|Shipping Weight:||2 lbs.|
|Return Policy:||Returns accepted|
© 2019 Poolweb.com. All Rights Reserved