Metal Miracle - Salt Maintenance - 1 Quart

Description

This is a 2 quart bottle of Haviland Salt Support Metal Miracle that targets metal staining, scale, and discolored water. It also prevents future stains and scales from forming. Metal Miracle is a powerful liquid stain and scale formula that will remove unwanted copper, iron, and manganese in the pool.

Active Ingredients of this Product: 99% Hydroxyethylidene (phosphonic acid).

Directions for Adding Miracle Metal to your Pool:

1. Do not mix with other chemicals, always add chemical to water, and never water to the chemicals. For best results, apply to water that is above 60 degrees F.
2. Backwash or clean filter prior to use. Turn of the salt cell generator prior to treatment. It is unnecessary to remove the cell from the plumbing system. (See your dealer for temporary alternate sanitizing options.)
3. Adjust pH to 7.5 or higher. Lower the chlorine levels at or below 1 ppm. Avoid superchlorinating or using the salt cells boost mode or superchlorinating mode for one week after application.
4. Apply product in the evening or at a period of time when the pool is not in use. With the pump and filter system running, add this product around the perimeter of the pool at the rate of 1 quart per 10,000 gallons of pool water. If staining is heavy or if water is extremely discolored, add 1 quart per 5,000 gallons of water.
5. Continuously operate filter system for 48 hours. Pool may be used at least 8 hours after initial application.
6. This product may start to work immediately, but may take up to a week to penetrate deeply embedded stains. Depending on water conditions and amounts of stains, scale, and other materials present, pool may turn hazy. This is normal and is an indication that the product is working.
7. After 48 hours, resume normal pool operation. For pools with sand or DE filters, backwash according to the manufacturer's instructions. For cartridge filters, remove clean and replace the media according to manufacturers recommendations. For best results, use a cartridge cleaning chemical to clean the media before replacing the filter.

For Monthly Treatment:

If source water has more than 2-3 ppm of metals present, add 16 ounces of this product for every 10,000 gallons of water monthly. For pool water that has trace amounts of metals in source water, add 3-6 ounces per 10,000 gallons monthly.