Raypak Low Nox 407A Heater Parts | 121 Parts
|Gasket Header Flange - 2 Inch Item # 800080B||$7.38|
|Polymer Return Header 206A-407A Kit Item # 015095F||$98.89|
|Gasket Heat Exchanger 3/4 Idflat Kit Item # 800014B||$18.03|
|PC Board Shield 206A-408 Item # 015557F||$4.42|
|Drain Valve 1/8 NPT Kit Item # 013793F||$3.51|
Any key items not listed on the above schematic are no longer available.
1-HM Heat Exchanger 406/407 Cast Iron ASME Cupro Nickel Kit
Item #: 010363F
2-HM Inlet/Outlet Header Cast Iron ASME, 185-405, 206-407
Item #: 006730F
3-HM Return Header Cast Iron ASME, 185-405,0206-406, 207-407
Item #: 006731F
4-C PC Board Controller Replacement - IID 206A-408 3-Wire Kit
Item #: 013464F
4-HP Tube Bundle 406/407Polymer Cupro Nickel - Units Manufactured Prior To 7/2013
Item #: 010367F
5-C LCD Display Poolstat Kit - Units Manufactured From 5/2011
Item #: 013640F
5-HP Heat Exchanger Baffle 406/407 - Units Manufactured Prior To 6/2013
Item #: 010041F
6-M Control Bezel (Includes Dial Decal) - Units Manufactured From 5/2011
Item #: 013491F
6-M Control Bezel (Includes Dial Decal) - Units Manufactured Prior to 5/2011
Item #: 009491F
7-M Switch/Decal Membrane - Units Manufactured Prior to 2011
Item #: 009492F
7-M Switch/Decal Membrane - Units Manufactured From 2011
Item #: 013492F
14-HP Unitherm Governor Plug Polymer 185-406, 206-406, 207-407
Item #: 006720F
15-HM Inlet/Outlet Cast Iron Flange - 1-1/2 and 2 Inch Kit
Item #: 003766F
16-M Flow Switch for Units Manufactured Prior to 4/25/16
Item #: 007142F
17-M Flow Switch Paddle Open Frame for Units Manufactured Prior to 4/25/16
Item #: 010026F
Deliming 5/8 Tube Kit Item # 052871F
- Will this kit work on a Jandy LXi pool heater? Paul asked on 05-21-2017
- Poolweb Technical Support answered on 05-22-2017 This Deliming 5/8 Tube Kit is made by RayPak for Raypak heaters with 5/8 tubes. It will work on other manufacturers heaters with the correct sized tubes.
CPVC Adapter Item # 005393F
- CPVC Adapter (005393F-I). Is this part a single piece, or a set of 2? Bill asked on 05-24-2017
- Poolweb Technical Support answered on 05-25-2017 It's a set of 2.
PC Board Controller Replacement - IID 206A-408 3-Wire Kit Item # 013464F
- LCD reads "SPK" and heater not firing. Is this the replacement PC board heater model PR2662 enc? MICHAEL asked on 08-18-2017
- Poolweb Technical Support answered on 08-21-2017 This is the replacement board for several Raypak heaters including the P-R266A. If that is not your heater, you can create a technical ticket for additional assistance by going to firstname.lastname@example.org.
Flow Switch for Units Manufactured Prior to 4/25/16 Item # 007142F
- Do you sell the blades separately for the Flow Switch (007142F)? Liz asked on 10-17-2017
- Poolweb Technical Support answered on 10-20-2017 No. On the schemetic, Raypak does not break that part down any further.
Cover Control Bezel Kit Item # 009487F
- Will the cover control Bezel kit fit Rheem P-M406A-EP-C? Jerry asked on 12-19-2017
- Poolweb Technical Support answered on 12-20-2017 Yes. It's the same heater as the P-R model, just the Raypak brand instead of Rheem brand.
- Will this cover fit Rheem Model P-M266A-EP-C? What are the dimensions of this cover? Alan asked on 12-25-2017
- Poolweb Technical Support answered on 12-27-2017 Yes, it will. It fits both the Raypak and Rheem model heaters listed. Dimensions are not available.
LCD Display Poolstat Kit - Units Manufactured From 5/2011 Item # 013640F
- My LCD display is unreadable. Is this the replacement for model P-M266A-EN-C? Ken from Bradenton asked on 01-10-2018
- Poolweb Technical Support answered on 01-11-2018 This is a replacement part for all models of the P-R atmospheric pool heaters.
- I can no longer read the screen on my Model 406A. About half of the LCD does not work. What part do I need to repair this issue. Thanks for your help. Ken from Vail asked on 01-24-2019
- Poolweb Technical Support answered on 01-24-2019 Ken, we would love to assist you with the heater parts but must refer you to the experts at Raypak for tech support. Their number is 1-805-278-5300. And your issue may involve more than the display. We do have the parts schematic for the 406A heater listed in our Parts Category. You can always come back to this site and purchase the parts Raypak recommends. The direct page for the 406A schematic is: #Raypak_Atmospheric_Heater_406A_Parts.
Sensor Well Millivolt Item # 006805F
- What is the pipe thread size? Gary Schattl asked on 06-24-2018
- Poolweb Technical Support answered on 06-26-2018 This is a replacement part for specified Raypak heaters. All the sizing information we have is posted. For additional information, you may contact Raypak at 1-805-278-5300.
Pressure Switch 1.75 PSI Item # 006737F
- Does this Raypak pressure switch 00637F fit a Raypak model P-R266A-MN-C heater? Phil asked on 08-04-2018
- Poolweb Technical Support answered on 08-06-2018 Yes, it does. If you go down to Replacement Part For, you can see the list of schematics this part is attached to. You can also click on your model schematic and it will bring up the full list of parts.
Return Header Cast Iron ASME, 185-405,0206-406, 207-407 Item # 006731F
- Hello, will this Raypak header fit the same as this part (Raypak 002491F Replacement Return Header 962/926 1125/1083)? I believe that one is not cast iron. Jim asked on 06-11-2019
- Poolweb Technical Support answered on 06-11-2019 No, Jim. They are attached to completely different heaters. The #002491F is for Raypak commercial heaters listed under Found in the Following Products. If you have one of the heaters listed, we only see that header listed which is brass.